Teroson VR 10 - 10 l (FL) cleaner, surface treatment

Teroson VR 10 (replaces VR 20) is a liquid universal cleaner and thinner based on hydrogenated hydrocarbons (without added aromatics and with low n-hexane content). The product does not contain chlorinated hydrocarbons. With short-term exposure, it does not damage paints used in the automotive industry. Cleaner - FL does not slow down the curing of polyurethane-based adhesives/sealants.

Cleaner - FL is primarily used as a degreasing and cleaning agent for surfaces before and after the application of adhesive or sealant. Thorough cleaning of surfaces before bonding is essential for perfect adhesion and involves the removal of dust, grease, and lubricants. Depending on the type of adhesive or sealant, Cleaner - FL can also be used to remove excess amounts or to wipe contaminated areas. It also effectively removes protective coatings from vehicle underbodies.

In some applications, Teroson FL is suitable as a thinner for certain adhesives/sealants and coatings. However, it is important to consider that these materials are commonly used undiluted. Only for certain applications where a thinner consistency is needed may dilution be desirable.

Usage: Depending on the degree of contamination, size, and shape of the cleaned components, apply Cleaner – FL and wipe with a brush, cloth, cleaning wipe, etc. To prevent unwanted contamination of the contents, always pour the cleaner onto a cloth (do not use the method of pressing the cloth against the opening and turning the container upside down!) or pour the required amount into another container. Only pour the amount needed for cleaning and immediately reseal the container tightly. The cleaned component must completely dry before applying adhesive or sealant (depending on the surrounding conditions, approximately 2 – 10 minutes). Using compressed air blowing (in unfavorable conditions) can shorten the drying time. However, this method may compromise the cleaning result due to the presence of oil traces in the compressed air. For porous substrates, it is advisable to wait about 30 minutes after cleaning.

If you are cleaning residues of sealant/adhesive (e.g., after windshield replacement), it is important to familiarize yourself with the instructions for using this product.