Your most reliable B2B supplier on the market!

27

We have more than 27 years of experience in the field

+400

We offer more than 400 adhesives and sealants for all materials

Expert advice

We are experienced. We are happy to advise you!

+5000

We have more than 5,000 satisfied customers

Molykote  |  SKU: 106125

Molykote D-7409 - 500 g

MOLYKOTE D-7409 Anti-Friction Coating is a heat-cured dry lubricant coating designed for long-term lubrication and protection of metal components. It combines excellent lubrication properties with high resistance to wear, corrosion, and elevated operating temperatures.


Varianta
€132,69 with VAT €111,50 without VAT
Shipping calculated at checkout.
Shipping options
27

We have more than 27 years of experience in the field

+400

We offer more than 400 adhesives and sealants for all materials

Expert advice

We are experienced. We are happy to advise you!

+5000

We have more than 5,000 satisfied customers

Description

MOLYKOTE D-7409 Anti-Friction Coating is a heat-cured dry lubricant coating designed for long-term lubrication and protection of metal components. It combines excellent lubrication properties with high resistance to wear, corrosion, and elevated operating temperatures.

With a wide temperature range of −70 °C to +300 °C, it is particularly suitable for applications where conventional oils and greases cannot be used. It provides effective protection under high loads, low speeds, oscillating movements, and intermittent operation. At the same time, it helps to reduce fretting wear caused by small relative movements of contact surfaces.

Main advantages

  • Excellent wear protection – reduces friction and extends the life of metal components.
  • Wide temperature range – reliably works at temperatures from −70 °C to +300 °C.
  • High load capacity – suitable for heavily loaded sliding surfaces and mechanisms.
  • Corrosion protection – creates a protective coating that helps prevent corrosion damage.
  • Chemical resistance – withstands the effects of oils, lubricants, and solvents.
  • Limitation of fretting wear – effective in slow, oscillating, and intermittent movements.
  • Long-term dry lubrication – ideal for applications where conventional lubricants are unsuitable.
  • Multiple application methods – can be applied by spraying, dipping, centrifuging, or brushing.

Areas of application

  • Lubrication and protection of piston rings and lifters.
  • Surface treatment of starter components and hood latches.
  • Lubrication of highly loaded sliding guides.
  • Mechanisms with low speeds and oscillating movements.
  • Components exposed to elevated temperatures and mechanical loads.
  • Applications requiring long-term lubrication without the use of oils and greases.

Technical parameters

Parameter Value
Manufacturer MOLYKOTE
Designation D-7409 Anti-Friction Coating
Type Heat-cured dry lubricant coating
Color Gray-black
Operating temperature −70 °C to +300 °C
Viscosity at 23 °C Approximately 400 mPa·s
Density at 23 °C Approximately 1.17 g/ml
Flash point Approximately 35 °C (Tag CC)
Recommended dry film thickness 5–20 μm
Theoretical yield Approximately 16 m²/kg at 10 μm
Curing conditions 30 minutes at 220 °C
Recommended thinner MOLYKOTE 7415 Thinner
Shelf life Up to 36 months
Recommended storage temperature +5 to +23 °C

Application instructions

  1. Surface preparation: Before application, thoroughly clean and degrease the surface. For better adhesion and longer life of the coating, phosphating or blasting with abrasive of approximately 180 grit is recommended.
  2. Application: The product can be applied by spraying at a pressure of 3–5 bar, dipping, centrifuging, or brushing.
  3. Layer thickness: The recommended thickness of the resulting dry lubricant film is 5–20 μm.
  4. Ventilation: Allow the applied coating to ventilate briefly before thermal curing to evaporate solvents.
  5. Curing: Cure the coating for approximately 30 minutes at a part temperature of 220 °C.
  6. Dilution: If necessary, use the recommended thinner MOLYKOTE 7415 Thinner.

Storage recommendations

Store the product in its original, tightly closed container in a dry and well-ventilated place, ideally at a temperature of 5–23 °C. The maximum storage temperature is 40 °C.

Protect from heat sources, sparks, and open flames. Solvent vapors may form explosive mixtures with air. Ensure proper grounding of equipment when transferring material.

Parameters

QUESTION TO THE DEALER

Molykote

Molykote D-7409 - 500 g

€132,69 with VAT €111,50 without VAT

MOLYKOTE D-7409 Anti-Friction Coating is a heat-cured dry lubricant coating designed for long-term lubrication and protection of metal components. It combines excellent lubrication properties with high resistance to wear, corrosion, and elevated operating temperatures.

Varianta

  • Výchozí varianta
View product