Loctite 424 - 20 g, instant adhesive

Loctite 424 is an excellent product that can be classified as an instant adhesive for rubber. It offers the highest adhesive performance when bonding NBR, EPDM, and other elastomers, but also bonds plastics and metals equally well.

Technical parameters: 

• Viscosity: 100 [mPa.s]
• Maximum gap: 0.10 [mm]
• Temperature resistance: -40 to +80 [°C]
• Bonding materials: steel, aluminum, zinc dichromate, neoprene, rubber, nitrile, ABS, PVC, polycarbonate, and others.
• Shear strength [N/mm2]: 
• On steel: 18 - 2
• On ABS: 6 - 20
• On polycarbonate: 5 - 20
• Fixation speed [s]: 
• On steel: 15 - 30
• On ABS: 2 - 10
• On polycarbonate: 15 - 50

Properties: 

• Technology: cyanoacrylate
• Appearance: clear, transparent to straw-yellow liquid
• Components: single-component
• Viscosity: low
• Curing: moisture
• Application: bonding
• Installation, disassembly, and cleaning instructions can be found in the product technical data sheet. Safety data sheet for Loctite 424 available upon request.

Not recommended:

• to be used in pure oxygen or oxygen-rich systems and should not be used for sealing chlorine or other strongly oxidizing materials.

For the best bonding results, the bonded surfaces should be clean and degreased. To accelerate curing (due to a large gap between bonded parts), it is recommended to use a suitable activator. However, this may result in reduced final strength of the bonded joint (testing necessary to verify results).